slava
New Member
Posts: 4
|
Post by slava on Sept 15, 2013 14:13:25 GMT -5
Hi from russia. I began to study this plug-in and came up with the scene, the agent first stand, then walk, climbs on the cylinder, and then walk. Does not work, after the agent has climbed on the cylinder it continues to climb animation continues and hi not walk what to do? if you do not understand I will write on the file attached, help please simple version the agent stand, wallk, gets on box goes, wallk on box, gets off box and wallk
|
|
|
Post by Yeah YANG on Sept 15, 2013 21:39:26 GMT -5
Dear Slava, Thank you for your testing! The honor is ours! is there any logic trigger the second "walk", also I think the second "walk" need output value greater than 1. How you trigger your actions?? for example default is stand, logicA > first walk is 1.0 logicB > climb is 1.2 and if you want to walk again, the logicB cannot be activated. also the transition map should be setup correctly. if cannot solve, please zip and upload your maya scene file:) Thank you!! Best, --Yeah Hi from russia. I began to study this plug-in and came up with the scene, the agent first stand, then walk, climbs on the cylinder, and then walk. Does not work, after the agent has climbed on the cylinder it continues to climb animation continues and hi not walk what to do? if you do not understand I will write on the file attached, help please simple version the agent stand, wallk, gets on box goes, wallk on box, gets off box and wallk
|
|
slava
New Member
Posts: 4
|
Post by slava on Sept 16, 2013 4:26:09 GMT -5
|
|
|
Post by Yeah YANG on Sept 17, 2013 9:17:41 GMT -5
Hello slava, You can do this, you can add a "HP" value to agents, the default this 0 when the agent perform "swarmUP", the "HP" turn to 1 and if "HP" is 1, it will always playback walk~~ Just like variable control:) pretty simple stuff~~ Bridging it~ I hope this can help~ Thank you very much for your testing!! --Yeah
|
|
slava
New Member
Posts: 4
|
Post by slava on Sept 18, 2013 2:16:50 GMT -5
|
|
|
Post by Yeah YANG on Sept 18, 2013 2:25:16 GMT -5
Awesome!! Glad to hear that is working:) Hope you enjoying our tool:) best regards! --Yeah
|
|